Helcim Logo Support & Tutorials

© Copyright 2006-2018 Helcim Inc.

All Rights Reserved.

Ingenico Telium Terminals » Advanced Options »

Performing a Maintenance Download on the Terminal For USA and Canada

The maintenance download allows you to download updated features and parameters for your terminal. For high-speed Ethernet:

1) Press [#]

2) Press [4] Maintenance

3) Press [1] Download

4) Press [1] Setup

5) Scroll download and highlight "IP/Eth", press the green [OK]

6) Select SSL "Yes", press the green [OK]

7) Select "PROFILE", press the green [OK]

8) The IP address to the server should already be present, press the green [OK]

9) The Port should already be present, press the green [OK]

10) The TMS Identifier should already be present, press the green [OK]

11) Select Protect Download "Off", press the green [OK] (US ONLY).     11. CAN [SOFTWARE NR 0 , press the green ]

12) "Print Param. Receipt?", press the green [OK] (US ONLY)               12. CAN [Start Download ]

 

13) Press [2] Start Download

 

For dial:

1) Press [#]

2) Press [4] Maintenance

3) Press [1] Download

4) Press [1] Setup

5) Scroll download and highlight "Modem", press the green [OK]

6) Select PSTN, press the green [OK]

7) The phone number should already be present, press the green [OK]

8) The TMS Identifier should already be present, press the green [OK]

9) Select Protect Download "Off", press the green [OK] (US ONLY).    9. CAN [SOFTWARE NR 0 , press the green ]

10) "Print Param. Receipt?", press the red button                             10. CAN [Start Download ]

11) Press [2] Start Download

 

The machine will now download and install its new parameters (can take a few minutes). Once completed, it will restart automatically. If the terminal asks to create an Admin user:

1) Admin name (enter [1])

2) Admin password [1][2][3][4][5][6][7][F] (the [F] key is below [7])

 

The machine is now ready to be used.