Helcim Logo Support & Tutorials

© Copyright 2006-2018 Helcim Inc.

All Rights Reserved.

Credit & Debit Terminals » VeriFone Vx Series »

Programming Instructions - VX520 DIAL

Creating Alpha Characters


To enter alphabetical characters, press the number key with the corresponding letter. Then press the [ALPHA] key to cycle through the letters until the desired letter is shown on the screen.

VX520 Default Password


1 [ALPHA] [ALPHA] 66831
1) Press [F2] + [F4]
2) Enter password 1 [ALPHA] [ALPHA] 66831 and press [Enter]
3) Down arrow and select "MODE MENU 2"
4) Select "Memory Functions"
5) Select "Clear Memory"
6) Enter the password again (may not ask)
7) Select "Clear Groups" (may show "Clear File Groups")
8) Select "Confirm"
9) Press the [Red] key to go back to the "MODE MENU" screen
10) Select "Edit Parameters"
11) Press [Enter]
12) Screen should show FILE CONFIG.SYS press [Enter]
13) Set the following parameters:


*ZA=*MA
*ZR=6
*ZRESP=16
*ZP=18004725850
*ZT=YOUR TERMINAL IDENTIFYING ID, PROVIDED TO YOU BY HELCIM

14) Press the [Red] key to go back
15) Select "Download"
16) Download settings should be


MULTI-APP
FULL
MODEM

17) Select "Start"
18) The download should start. Once completed the terminal will reboot.