© Copyright 2006-2019 Helcim Inc.
All Rights Reserved.
Step #1 – Remove terminal from base
Step #2 – Unplug the power from the base and plug it back in
Step #3 – Turn off the terminal [middle button] and turn it back on [green button]
Step #4 – Place the terminal back on the base:
1) Press [#]
2) Press [3] for Setup Menu
3) Press [2] for Communications
4) Press [4] for Bluetooth
5) Press [4] for Remove All Bases
6) Press [1] for New Base Should show message "Base association ok"