Helcim Logo Support & Tutorials

© Copyright 2006-2018 Helcim Inc.

All Rights Reserved.

Verifone Series Terminals » Setup and Connection »

VX520

Ethernet

1) Open rear panel on terminal by pressing down the tab and pulling the panel backwards.

2) Plug the ethernet cable into the ethernet port (labeled "ETH") on the back of the terminal and insert the other end of the cable into an open port on your router

3) Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt) and turn the plug inwards towards the arrow

4) Place the rear panel back into the terminal by inserting the hooks on the panel in place and then press the terminal down until it clicks into place

Telephone

1) Open rear panel on terminal by pressing down the tab and pulling the panel backwards.

2) Plug the telephone cable into the telephone line port (labeled with a telephone icon) on the back of the terminal and insert the other end of the cable into your telephone outlet

3) Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt) and turn the plug inwards towards the arrow

4) Place the rear panel back into the terminal by inserting the hooks on the panel in place and then press the terminal down until it clicks into place