Helcim Logo Support & Tutorials

© Copyright 2006-2018 Helcim Inc.

All Rights Reserved.

Verifone Series Terminals » Setup and Connection »

VX680 3G

Ethernet

1) Insert the ethernet cable into the ethernet port (labeled ETH) on the rear of the charging base and plug the other end of the cable into your router. Please note this connection is only necessary for updating the terminal and not its use.

2) Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)

3) Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Telephone

1) Insert the ethernet cable into the telephone port (labeled with a telephone icon) on the rear of the charging base and plug the other end of the cable into your telephone outlet. Please note this connection is only necessary for updating the terminal and not its use.

2) Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)

3) Place the terminal into the charging base (8-12 hours of charging is recommended daily)