Helcim Logo Support & Tutorials

© Copyright 2006-2018 Helcim Inc.

All Rights Reserved.

Ingenico Telium Terminals » Reports & Settlements »

Automatic Batch Settlement

CANADIAN TERMINALS

To set an automatic batch settlement, follow the instructions below. To remove the automatic settlement, the time should be set to "0000".

1) Press [#]

2) Press [3] Setup

3) Press [5] TransOptions

4) Press [4] for Settlement

5) Press [6] for Auto Time

6) Enter the time (24-hour clock format) and press [OK]

7) Press the red [X] until you are back at the main screen

 

US TERMINALS

To set an automatic batch settlement, follow the instructions below. To remove the automatic settlement, the time should be set to "0000".

1) Press [#], enter password

2) Press [3] Setup

3) Press [5] Transoptions

4) Press [4] for Settlement

5) Press [6] for Auto Time

6) Enter the time (24-hour clock format) and press [OK]

7) Press the red [X] until you are back at the main screen